Get the right equipment for your needs. For expert guidance and showroom availability, call us at 262‑549‑4900.
The Drive Hi-Low Bed provides smooth position change with easy-to-use Hand Pendant control. It has low deck height with the flexibility to configure “roll at any height” or “roll at low height only” castor location.
#15005LP
The Delta 1000 is truly universal because the bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
The transition box mounted on the foot section is key to interchangeability
The transition box allows you to change the rotation of the high/low shaft
Headboard is taller than footboard to better fit home decor
The wood grain panels are break and scratch resistant
Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
Labels and color-coded springs assure accurate installation of side rails for patient safety
Unique motor is completely self-contained to reduce weight and noise
9.25" to 23" deck height
Easy to set up
Top mounted Hi/Lo crank accessibility
Height-adjustable motor comes pre-installed on the foot section
Caster easily moves from standard to low bed position
The motor assembly can be installed and removed with patient in bed
Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility Satisfies all applicable FDA entrapment guidelines
The motor is UL approved
In the event of a power failure, a 9 volt battery, located in the hand control, can lower the head and foot sections nine times
New and improved hand pendant has large, easy-to-use controls
Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
Channel frame construction provides superior strength and reduced weight
Zinc-coated spring deck
Extension kit available (model #15030EXTKIT) extends length from 80" to 84"
Weight Capacity 450 lbs
Model: 15005LP
Overall Length: 87.99"
Overall Width Without Rails: 36.22"
Overall Width With Rails: 38.58"
Length & Width of Mattress Deck: 79.53" × 34.65"
Maximum Weight Capacity: 350 lbs. Patient Weight / 450 lbs. Includes All Accessories
Head Deck Angle: 0° to 70°
Foot Deck Angle: 0° to 46°
Height Range: 9.5" – 22.5"
Under Bed Clearance: 2.6"
Total Product Weight: 169 lbs.
Head End & Head Section: 68 lbs.
Foot End & Foot Section: 101 lbs.
Noise Level: ≤65 dB(A)
Electrical Requirements: 120VAC, 60Hz
Rated Current Input: 3.15A max
Fuse Specification: 2A 250V
Duty Cycle: T_On 2 Min / T_Off 18 Min
Battery Backup: N/A
Relative Humidity: 15% to 93% relative humidity, non-condensing
Recommended Storage & Shipping Temperature: -22°F to +158°F
Recommended Operating Temperature: 41°F to 104°F
Atmospheric Pressure Range: 700 hPa to 1060 hPa
Get the right equipment for your needs. For expert guidance and showroom availability, call us at 262‑549‑4900.
The Drive Hi-Low Bed provides smooth position change with easy-to-use Hand Pendant control. It has low deck height with the flexibility to configure “roll at any height” or “roll at low height only” castor location.
#15005LP
The Delta 1000 is truly universal because the bed frame can be used with Drive's and most other manufacturers' bed ends, old and new
The transition box mounted on the foot section is key to interchangeability
The transition box allows you to change the rotation of the high/low shaft
Headboard is taller than footboard to better fit home decor
The wood grain panels are break and scratch resistant
Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
Labels and color-coded springs assure accurate installation of side rails for patient safety
Unique motor is completely self-contained to reduce weight and noise
9.25" to 23" deck height
Easy to set up
Top mounted Hi/Lo crank accessibility
Height-adjustable motor comes pre-installed on the foot section
Caster easily moves from standard to low bed position
The motor assembly can be installed and removed with patient in bed
Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility Satisfies all applicable FDA entrapment guidelines
The motor is UL approved
In the event of a power failure, a 9 volt battery, located in the hand control, can lower the head and foot sections nine times
New and improved hand pendant has large, easy-to-use controls
Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
Channel frame construction provides superior strength and reduced weight
Zinc-coated spring deck
Extension kit available (model #15030EXTKIT) extends length from 80" to 84"
Weight Capacity 450 lbs
Model: 15005LP
Overall Length: 87.99"
Overall Width Without Rails: 36.22"
Overall Width With Rails: 38.58"
Length & Width of Mattress Deck: 79.53" × 34.65"
Maximum Weight Capacity: 350 lbs. Patient Weight / 450 lbs. Includes All Accessories
Head Deck Angle: 0° to 70°
Foot Deck Angle: 0° to 46°
Height Range: 9.5" – 22.5"
Under Bed Clearance: 2.6"
Total Product Weight: 169 lbs.
Head End & Head Section: 68 lbs.
Foot End & Foot Section: 101 lbs.
Noise Level: ≤65 dB(A)
Electrical Requirements: 120VAC, 60Hz
Rated Current Input: 3.15A max
Fuse Specification: 2A 250V
Duty Cycle: T_On 2 Min / T_Off 18 Min
Battery Backup: N/A
Relative Humidity: 15% to 93% relative humidity, non-condensing
Recommended Storage & Shipping Temperature: -22°F to +158°F
Recommended Operating Temperature: 41°F to 104°F
Atmospheric Pressure Range: 700 hPa to 1060 hPa
